Internationale Standards - Keramik

Standard
Beschreibung
ASTM C1161

This test method covers the determination of flexural strength of advanced ceramic materials at ambient temperature. Four-point-1/4 point and three-point loadings with prescribed spans are the standard. Rectangular specimens of prescribed cross-section sizes are used with specified features in prescribed specimen-fixture combinations.
ASTM C1211
This test method covers determination of the flexural strength of advanced ceramics at elevated temperatures. Four-point-1/4 point and three-point loadings with prescribed spans are the standard. Rectangular specimens of prescribed cross-section are used with specified features in prescribed specimen-fixture combinations.
ASTM C1273
  This test method covers the determination of tensile strength under uniaxial loading of monolithic advanced ceramics at ambient temperatures.
ASTM C1291
  This test method covers the determination of tensile creep strain, creep strain rate, and creep time-to-failure for advanced monolithic ceramics at elevated temperatures, typically between 1073 and 2073 K.
ASTM C1292
  This test method covers the determination of shear strength of continuous fiber-reinforced ceramic composites (CFCCs) at ambient temperature.
ASTM C1323
  This test method covers the determination of ultimate strength under monotonic loading of advanced ceramics in tubular form at ambient temperatures.
ASTM C1337
  This test method covers the determination of the time-dependent deformation and time-to-rupture of continuous fiber-reinforced ceramic composites under constant tensile loading at elevated temperatures.
ASTM C1341
  This test method covers the determination of flexural properties of continuous fiber-reinforced ceramic composites in the form of rectangular bars formed directly or cut from sheets, plates, or molded shapes.
ASTM C1358
  This test method covers the determination of compressive strength including stress-strain behavior under monotonic uniaxial loading of continuous fiber-reinforced advanced ceramics at ambient temperatures.
ASTM C1359
  This test method covers the determination of tensile strength including stress-strain behavior under monotonic uniaxial loading of continuous fiber-reinforced advanced ceramics at elevated temperatures.
ASTM C1366
  This test method covers the determination of tensile strength under uniaxial loading of monolithic advanced ceramics at elevated temperatures.
ASTM C1425
  This test method addresses the compression of a double-notched specimen to determine interlaminar shear strength of continuous fiber-reinforced ceramic composites (CFCCs) at elevated temperatures.
ASTM C1469
  This test method covers the determination of shear strength of joints in advanced ceramics at ambient temperature.
ASTM C674
  These test methods cover determination of the modulus of rupture and the modulus of elasticity of fired ceramic whitewares bodies, formed by any fabrication method, and are applicable to both glazed and unglazed test specimens.
ASTM C773
  This test method covers two test procedures (A and B) for the determination of the compressive strength of fired whiteware materials.
BS 6431-12:1983, EN 100:1991
  Ceramic floor and wall tiles. Method for determination of modulus of rupture.
BS EN 1892:2005
  Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of tensile properties.
BS EN 1894:2005
  Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of shear streng th by compression loading of notched specimens.
BS EN 658-1:1998
  Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of tensile strength.
BS EN 658-2:2002
  Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of compression properties.
BS EN 658-3:2002
  Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of flexural strength.
BS EN 658-5:2002
  Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of interlaminar shear strength by short span bend test (three points).
BS EN ISO 10545-4:1997
  Ceramic tiles. Determination of modulus of rupture and breaking strength.
BS ISO 15490:2000
  Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for tensile strength of monolithic ceramics at room temperature.
EN 843-1
  Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature. Part 1. Determination of flexural strength.
EN 843-2
  Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature. Part 2. Determination of Young's modulus, s hear modulus and Poisson's ratio.
ISO 17565
  Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramics at elevated temperature
ISO 22215
  Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for tensile creep of monolithic ceramics