| ASTM D4987 |
|
This test method covers the procedure for testing the tensile breaking strength of the perforations in one-part continuous forms paper.
|
ASTM D5803
|
|
This test method provides a quick, reliable means to measure the wet zero-span tensile strength of a specimen of sheeted material.
|
ASTM D5804
|
|
This test method provides a quick reliable means to measure the zero-span tensile strength of a randomly oriented specimen of fibers when dry.
|
ASTM D774
|
|
This test method covers measurements of the bursting strength of paper and paper products occurring as single or laminated flat sheets not over 0.6mm. (0.025 in.) in thickness having a bursting strength of 30 kPa up to 1400 kPa (4 psi up to 200 psi).
|
ASTM D828
|
|
This test method covers procedures for determining tensile properties of paper and paperboard.
|
ASTM D829
|
|
These test methods measure the (wet) tensile breaking strength of paper, paper products, and paperboard (excluding corrugated board) when saturated with water.
|
BS 2922-2:1984, ISO 3781-1983
|
|
Strength of wet paper and board. Method for determination of the tensile strength of paper and board after immersion in water.
|
BS 3748:1992, ISO 2493:1992
|
|
Method for determination of resistance to bending of paper and board.
|
BS 4415-1:1992, ISO 1924-1:1992
|
|
Determination of the tensile properties of paper and board. Constant rate of loading method.
|
BS 4816:1972
|
|
Method for the determination of the puncture resistance of board.
|
BS 7325:1990, ISO 9895:1989
|
|
Method for determination of the compressive strength of paper and board by the short span test.
|
BS EN 12625-4:1999
|
|
Tissue paper and tissue products. Determination of tensile strength, stretch at break and tensile energy absorption.
|
BS EN 12625-5:1999
|
|
Tissue paper and tissue products. Determination of wet tensile strength.
|
BS EN ISO 1924-2:1995
|
|
Paper and board. Determination of tensile properties. Constant rate of elongation method.
|
BS ISO 11093-6:1996
|
|
Paper and board. Testing of cores. Determination of bending strength by the three-point method.
|
BS ISO 11093-7:1997
|
|
Paper and board. Testing of cores. Determination of flexural modulus by the three-point method.
|
BS ISO 12192:2002
|
|
Paper and board. Compressive strength. Ring crush method.
|
BS ISO 1924-3
|
|
Paper and board. Tensile strength, strain at break, tensile energy absorption and tensile stiffness. Part 3. Constant rate of elong ation method (100 mm/min).
|
ISO 11093-6
|
|
Paper and board. Testing of cores. Part 6. Determination of bending strength by the three-point method.
|